Research · Australia · eight jurisdictions · 2021 data

Where are apartments most common in Australia?

The short answer

New South Wales had the highest percentage of occupied homes that were flats or apartments in the 2021 Census: 21.7%. The ACT followed at 19.4% and the Northern Territory at 17.9%. This compares Australia’s eight states and territories using ABS occupied-private-dwelling counts, excluding visitor-only and other non-classifiable households. The percentage describes the type of home, rather than the number of people living in it.

Compare all eight states and territories

Here, “occupied homes” means occupied private dwellings in the ABS tables. For example, Queensland’s 12.5% means about one in eight occupied homes was a flat or apartment. This measures housing type, not shared accommodation or roommates.

The table keeps the year and population consistent. Each place name links to its own ABS QuickStats page. Counts and one-decimal percentages are the ABS’s published figures, not estimates of the market today.

2021 Census: percentage of occupied private dwellings that were flats or apartments, excluding visitor-only and other non-classifiable households
State or territoryOccupied flats or apartmentsOccupied private dwellingsFlats or apartments (% of occupied homes)
New South Wales630,0302,900,46821.7%
Victoria289,1202,390,23212.1%
Queensland233,5311,869,46212.5%
South Australia47,026691,3136.8%
Western Australia62,360964,7346.5%
Tasmania11,575218,4125.3%
Northern Territory12,64470,66017.9%
Australian Capital Territory32,669168,40019.4%

For context, the separately published Australian table records 1,319,095 occupied flats or apartments among 9,275,217 occupied private dwellings, or 14.2% of occupied private dwellings. Use it as a national benchmark, rather than an exact sum of the eight rows above.

Download the figures and source links as a CSV. The file contains the eight jurisdictions and the separately published Australian benchmark. It preserves the year, scope, denominator and source-check date beside each row.

More apartments can still mean a lower percentage

New South Wales had both the largest number of occupied flats or apartments and the highest percentage of occupied homes that were flats or apartments in this comparison. Beyond that, the order changes depending on the question you ask.

Victoria had 289,120 occupied flats or apartments, compared with Queensland’s 233,531. Yet flats and apartments made up a slightly higher percentage of occupied homes in Queensland: 12.5%, compared with 12.1% in Victoria. Victoria had more occupied private dwellings overall, so its larger apartment count represented a smaller percentage of those dwellings.

The ACT and Northern Territory illustrate the same distinction. Their apartment counts were smaller than Queensland’s, but flats and apartments represented a higher percentage of their occupied private dwellings. A count answers “how many flats or apartments?” A percentage answers “what proportion of occupied homes were flats or apartments?” Keep both visible when making a comparison.

How to check the percentage

Lot checked each published percentage using this calculation:

Occupied flats or apartments ÷ occupied private dwellings × 100.

For Queensland: 233,531 ÷ 1,869,462 × 100 = approximately 12.4919%, which rounds to the published 12.5%. For New South Wales: 630,030 ÷ 2,900,468 × 100 = approximately 21.7217%, which rounds to 21.7%.

On each ABS page, take “Flat or apartment” from the 2021 dwelling-structure column and “Occupied private dwellings” from the 2021 dwelling-count column. Confirm both table headings exclude visitor-only and other non-classifiable households. Do not substitute population, all private dwellings including unoccupied dwellings, or a 2016 comparison column.

We did not manufacture the denominator by adding the displayed structure categories. The published occupied-private-dwelling count is retained as its own source value. All eight ratios, the national benchmark and the Other Territories reconciliation row round to their respective ABS percentages at one decimal place.

What the comparison includes, and what it cannot tell you

The ABS dwelling-structure classification describes physical form. “Flat or apartment” is one category; semi-detached, row or terrace houses and townhouses appear in a separate category in these tables.

These figures cover occupied private dwellings within the stated exclusions. They are not a count of every apartment, because the comparison does not include unoccupied dwellings in its occupied-dwelling population. They also do not establish the number of strata lots, buildings, owners, management agreements or body corporate managers.

A state-wide percentage is a broad historical description. It cannot identify which suburb has the greatest apartment concentration, measure current demand, establish a property’s condition or demonstrate an investment return. Those questions need evidence at the relevant geographic level, for the relevant period and unit of measurement.

Why the eight rows are not an exact national total

Australia’s geographic classification also includes Other Territories, outside the eight-jurisdiction comparison. Its 2021 QuickStats table records 141 occupied flats or apartments and 1,533 occupied private dwellings within the same scope.

The eight comparison rows sum to 1,318,955 apartments and 9,273,681 occupied private dwellings. Adding the published Other Territories cells gives 1,319,096 and 9,275,214 respectively. The separately published Australian cells are one apartment lower and three occupied dwellings higher.

ABS applies small random adjustments to protect privacy, so published components can differ slightly from published totals. We preserve those cells instead of changing a jurisdiction’s count to force agreement. The national row is labelled as a separately published benchmark, and its percentage is calculated from its own denominator. Do not add or average the eight percentages to create a national percentage.

A useful way to reuse these figures

If you quote a row, keep four details with it: the place, 2021 Census reference, occupied-private-dwelling scope and original ABS link. For example: “In Queensland’s 2021 Census QuickStats table, flats and apartments accounted for 12.5% of occupied private dwellings, excluding visitor-only and other non-classifiable households.”

Keep the source-check date separate from the data year. Checking the page in October 2026 does not turn a 2021 observation into a 2026 estimate. If a newer comparable release becomes available, review its definitions and exclusions before replacing a row.

For more context on units and exclusions, read how to read Australia’s apartment count. The CSV supports this comparison; it is not a register of individual properties or a forecast.

Common questions

Which state or territory had the highest percentage of occupied homes that were flats or apartments in 2021?

New South Wales, at 21.7% of occupied private dwellings in the specified ABS table. The ACT followed at 19.4% and the Northern Territory at 17.9%. These percentages compare types of homes, not shared accommodation or the number of people in each home.

How does Queensland compare with Victoria?

Flats and apartments made up 12.5% of occupied private dwellings in Queensland and 12.1% in Victoria, within the same 2021 scope. Victoria had more occupied flats or apartments in absolute terms: 289,120 compared with Queensland’s 233,531.

Are these figures a count of strata lots?

No. Dwelling structure describes physical form. It does not establish title arrangements or the number of strata lots, owners, buildings or management contracts.

Does the table include vacant apartments?

No. This comparison uses occupied private dwellings and the stated household exclusions. It should not be labelled as a count of all apartments.

Why do the state and territory counts not add exactly to Australia’s figure?

Other Territories is outside the eight comparison rows, and ABS privacy adjustments can make published components differ from published totals. The article shows the reconciliation and retains the national benchmark as separately published.

Do these percentages describe homes in 2026?

No. These are historical 2021 Census observations, checked against the ABS pages on 27 October 2026. A recent source check does not change their reference period.

Sources & method

  1. ABS: New South Wales 2021 Census QuickStats. Dwelling structure and dwelling count tables, checked 27 October 2026. Historical 2021 data; stated household exclusions retained. Rechecked 21 November 2026; original data and publication dates retained.
  2. ABS: Victoria 2021 Census QuickStats. Dwelling structure and dwelling count tables, checked 27 October 2026. Historical 2021 data; stated household exclusions retained. Rechecked 21 November 2026; original data and publication dates retained.
  3. ABS: Queensland 2021 Census QuickStats. Dwelling structure and dwelling count tables, checked 27 October 2026. Historical 2021 data; stated household exclusions retained. Rechecked 21 November 2026; original data and publication dates retained.
  4. ABS: South Australia 2021 Census QuickStats. Dwelling structure and dwelling count tables, checked 27 October 2026. Historical 2021 data; stated household exclusions retained. Rechecked 21 November 2026; original data and publication dates retained.
  5. ABS: Western Australia 2021 Census QuickStats. Dwelling structure and dwelling count tables, checked 27 October 2026. Historical 2021 data; stated household exclusions retained. Rechecked 21 November 2026; original data and publication dates retained.
  6. ABS: Tasmania 2021 Census QuickStats. Dwelling structure and dwelling count tables, checked 27 October 2026. Historical 2021 data; stated household exclusions retained. Rechecked 21 November 2026; original data and publication dates retained.
  7. ABS: Northern Territory 2021 Census QuickStats. Dwelling structure and dwelling count tables, checked 27 October 2026. Historical 2021 data; stated household exclusions retained. Rechecked 21 November 2026; original data and publication dates retained.
  8. ABS: Australian Capital Territory 2021 Census QuickStats. Dwelling structure and dwelling count tables, checked 27 October 2026. Historical 2021 data; stated household exclusions retained. Rechecked 21 November 2026; original data and publication dates retained.
  9. ABS: Other Territories 2021 Census QuickStats. Dwelling structure and dwelling count tables, checked 27 October 2026. Historical 2021 data; stated household exclusions retained. Rechecked 21 November 2026; original data and publication dates retained.
  10. ABS: Australia 2021 Census QuickStats. Dwelling structure and dwelling count tables, checked 27 October 2026. Historical 2021 data; stated household exclusions retained. Rechecked 21 November 2026; original data and publication dates retained.
  11. ABS Census Dictionary: Dwelling structure (STRD). Classification and scope for the 2021 Census, checked 27 October 2026. Rechecked 21 November 2026; original data and publication dates retained.

Prepared by Lot with AI assistance from ABS public tables. Published cells are preserved; Lot checked the count-to-denominator ratios and documented the national reconciliation. The CSV is a selection of published aggregate data, not an independent survey. No practitioner review is claimed. How we research and check our resources.